Ask about our Sub-Zero, Viking, Wolf, Thermador specialist

Appliance repair -> Refrigerator repair

MIDWEST APPLIANCE is your solution for delivery and installation of refrigerators , and uninstalling refrigerators for cabinetry work in Los Angeles.

We provide services on All Brands of appliances such as Residential and Commercial Refrigerators, Freezers, Air Conditioners, Wine Coolers, Ice Machines.
Midwest Appliance company repairs and install all the brands and models of refrigerators in Los Angeles. If your refrigerator makes noise,hot, runs constantly, and  is not cold enough or you have any problem with it, just call  and let us take care of the rest. Midwest Appliance( Los Angeles refrigerator repair) is available 24/7 for your Los Angeles refrigerator repair . Free service call free with the appliance repair.

Call us to schedule your Los Angeles refrigerator repair appointment at:
310-600-6007

Los Angeles refrigerator repair service includes:

• INSTALLING AND MOVING A REFRIGERATOR OR FREEZER
• Service and repair all refrigerator brands and models
• Regular maintenance ,service and cleaning
• COMPRESSOR REPLACEMENT
• Thermostat replacement
• Condenser fan motor replacement
•  CONDENSER coils CLEANING
• The Diagnose-Test  of the refrigerator or freezer

Midwest Appliance service and repair follow refrigerator brands and models:

• Refrigerators
• Freezers
• Walk-in Coolers
• Commercial Freezers
• Commercial Refrigerators
• Salad Bars
• Sandwich Coolers
• Air Conditioners
• Heaters
• Wine Coolers
• Ice Machines

• Amana refrigerator repair
• Estate refrigerator repair
• Fisher & Paykel refrigerator repair
• Frigidaire refrigerator repair
• GE refrigerator repair
• Hotpoint refrigerator repair
• Kelvinator refrigerator repair
• Kenmore refrigerator repair
• LG refrigerator repair
• Samsung refrigerator repair
• Siemens refrigerator repair
• Westinghouse  refrigerator repair
• Whirlpool refrigerator repair
• Asko refrigerator repair

• Jenn-air refrigerator repair
• KitchenAid refrigerator repair
• Maytag refrigerator repair
• Sharp refrigerator repair
• Sub zero refrigerator repair
• Viking refrigerator repair
• Thermador refrigerator repair 

The refrigerator is a common item in today's household. Thousands homes in fact have not only a refrigerator with its built-in freezer compartment but also a separate stand-alone freezer. Some also have smaller refrigerators for the wet bar or out in the motor home. Basic operation, maintenance, troubleshooting, servicing, and repair is the same for all of them

How refrigerator works

Old Refrigerators

If you look at the back or bottom of an older refrigerator, you'll see a long thin tube that loops back and forth. This tube is connected to a pump, which is powered by an electric motor.
Inside the tube is Freon, a type of gas. Freon is the brand name of the gas. This gas, chemically is called Chloro-Flouro-Carbon or CFC. This gas was found to hurt the environment if it leaks from refrigerators. So now, other chemicals are used in a slightly different process (see next section below).
CFC starts out as a liquid. The pump pushes the CFC through a lot of coils in the freezer area. There the chemical turns to a vapor. When it does, it soaks up some of the heat that may be in the freezer compartment. As it does this, the coils get colder and the freezer begins to get colder.
In the regular part of your refrigerator, there are fewer coils and a larger space. So, less heat is soaked up by the coils and the CFC vapor.
The pump then sucks the CFC as a vapor and forces it through thinner pipes which are on the outside of the refrigerator. By compressing it, the CFC turns back into a liquid and heat is given off and is absorbed by the air around it. That's why it might be a little warmer behind or under your refrigerator.
Once the CFC passes through the outside coils, the liquid is ready to go back through the freezer and refrigerator over and over.

Today's Refrigerators

Modern refrigerators don't use CFC because CFCs are harmful to the atmosphere if released. Instead they use another type of gas called HFC-134a, also called tetrafluoroethane. HFC turns into a liquid when it is cooled to -15.9 degrees Fahrenheit (-26.6 degrees Celsius).
A motor and compressor squeezes the HFC. When it is compressed, a gas heats up as it is pressurized. When you pass the compressed gas through the coils on the back or bottom of a modern refrigerator, the warmer gas can lose its heat to the air in the room.
Remember the law of thermodynamics.
As it cools, the HFC can change into a liquid because it is under a high pressure.
The liquid flows through what's called an expansion valve, a tiny small hole that the liquid has to squeeze through. Between the valve and the compressor, there is a low-pressure area because the compressor is pulling the ammonia gas out of that side.
When the liquid HFC hits a low pressure area it boils and changes into a gas. This is called vaporizing.
The coils then go through the freezer and regular part of the refrigerator where the colder liquid in the coil pulls the heat out of the compartments. This makes the inside of the freezer and entire refrigerator cold.
The compressor sucks up the cold gas, and the gas goes back through the same process over and over.

 How to Install a Refrigerator

Step1
Put the refrigerator on strips of carpet, pile-side down, and slide it into place. Be sure to plug it in when you can reach the outlet with the cord.
Step2
Remove the carpet.
Step3
Lay a level across the top of the refrigerator to make sure it is level. If it isn't, remove the front grille at the base of the fridge, tilt the refrigerator back and place a wooden block under the front edge. Find the leveling legs on the front corners, and screw them up or down to level the unit.
Step4
Check the level again, and repeat this process until the fridge is level. (The door should shut by itself when opened to a 45-degree angle. If it doesn't, screw the leveling legs down enough so that it does.)
Step5
Consult your owner's manual on how to hook up the icemaker, if applicable.
Step6
Run the refrigerator for at least 4 hours before putting perishable food into it

REFRIGERATOR REPAIR, Maintenance and CLEANING  TIPS

If your refrigerator is not running or is not cold enough...

1. Turn the thermostat up to the next highest setting. If it comes on, let it run for 24 hours and check temperature to confirm it is working properly.
2. Clear/remove anything blocking the air flow around the outside of the refrigerator (on top, underneath, behind, beside, in front of, etc.). Allow 3" of clearance all the way around.
3. If there are condensor coils on the rear of the box, make sure the box is several inches from the wall and that nothing is on top at the rear, blocking the heat from coming off the coils.
4. If the condensor coils are underneath the refrigerator, clean the coils  at least twice a year. (Our company provide CONDENSoR coils CLEANING  )

The above tips are for informational purposes only. For your safety, we strongly recomend any refrigerator repairs to be performed only by a certified technician. Los Angeles refrigerator repair  technicians are available and you can call for professional help in Los Angeles  24/7 at:
310-600-6007

MIDWESTLos Angeles refrigerator repair coverage area includes entire Los Angeles and the surrounding cities: